Runway overruns: making safer landings a priority
Roughly once a month, at Canadian airports both large and small, an aircraft overruns the runway. Sometimes, the results are tragic.
By Wendy A. Tadros,
Chair, Transportation Safety Board of Canada
This article was originally published in the Canadian Skies e-newsletter on 8 April 2013.Footnote 1
Millions of landings occur each year at Canadian airports—the vast majority of them without incident, passengers and cargo arriving safely as intended.
But not always. Roughly once a month, at Canadian airports both large and small, an aircraft overruns the runway, sometimes with tragic results.
Everyone, of course, remembers the grim spectre of an Airbus A340 engulfed in flames after landing in a thunderstorm at Toronto's Pearson International Airport in August 2005.Footnote 2 That accident left two passengers and nine crew members with serious injuries. But recent years have also seen overruns at other Canadian cities, including one in Ottawa, Ontario;Footnote 3 one in Moncton, New Brunswick;Footnote 4and two in St. John's, Newfoundland.Footnote 5The numbers are even more surprising once all operator types are included. In fact, 39 times in the last three years a commercial, corporate, or private aircraft ran off the side or end of a Canadian runway—putting passengers, crew, and cargo at risk.
That's unacceptable, and it's exactly why the Transportation Safety Board of Canada (TSB) put the issue of overruns on its inaugural safety Watchlist back in 2010, and why we kept it on the list when it was time for an update in 2012. That list, which identifies the greatest risks to Canada's transportation system, is a blueprint for change, outlining what actions have been taken to date, and what still needs to be done.
Unfortunately, overruns haven't been easy to eliminate because the issue is complex. To date, TSB investigations have identified many factors, including the stability of the approach; wind direction and speed; the touchdown point and speed of the aircraft; the use of reverse thrust; the friction provided by the runway; weather; and surface conditions such as rain, ice, and snow. We also routinely examine crew training and decision-making, as well as company procedures, brake designs, and aircraft certification.
Nonetheless, there are a few things that we know can help—starting with making sure that aircraft have the room they need, when they need it.
One way to do this is to create a buffer strip at the end of the runway, followed by a runway end safety area (RESA). How big do these need to be? Well, according to a 1987 study conducted by the United States Federal Aviation Administration (FAA), 90% of aircraft that overrun runways stop within 300m of a runway's end. This figure was re-confirmed in a 2009 study by the Australian Transport Safety Bureau. Not surprisingly, these countries are world leaders for RESAs, and for an additional defence known as arrestor beds—which use a layer of lightweight, crushable concrete to slow a plane's wheels by breaking apart under heavy weight.
In Canada, our regulatory standards for runways lag behind international standards and best practices in other countries. That's disappointing. Transport Canada (TC) currently requires only a 60m buffer strip at the end of runways 800m or longer, though it recommends an additional 90m RESA for runways 1200m or longer. This 60m required plus 90m recommended would only match the minimum 150m standard set out by the International Civil Aviation Organization (ICAO). But ICAO also recommends an additional 240m RESA at the end of a 60m strip—again, bringing us back to the magic number of 300.
While the TSB understands that solutions to overruns can be expensive, doing nothing may ultimately cost even more. For example, a Flight Safety Foundation study found that, between 2005 and 2007, runway overruns cost the aviation industry $506 million per year in damage, in delays due to downtime, and in litigation.
The good news is that today, TC is proposing that Canada's longer runways match ICAO's 150m minimum standard for RESAs. And while the debate remains ongoing, some airport operators are taking the initiative and going further. Ottawa's Macdonald-Cartier International Airport, for example, installed a 300m RESA at both ends of Runway 07 in 2012, and it has committed to installing another at each end of Runway 14/32 this year. In Toronto, meanwhile, while some runway ends at Pearson International already had a 150 m RESA, additional work was done in 2012 to bring some others to that length.
More, however, can still be done, particularly during bad weather. Reducing the number of runway overruns in Canada will take numerous lines of defence and will involve crews, companies and regulators working together. Airport operators, meanwhile, must determine which of their runways pose the greatest risk and then develop appropriate mitigation measures—whether that's improving surface friction, increasing RESA length, or installing an arrestor bed.
At the TSB, meanwhile, we will continue to learn from our ongoing investigations, pushing for change—and safer landings—for all Canadians.
- Footnote 1
The article has been amended slightly from the published version: acronyms have been written out or removed to improve accessibility, and endnotes have been added.
- Footnote 2
TSB Investigation Report A05H002
- Footnote 3
TSB Investigation Report A10H0004 (In progress)
- Footnote 4
TSB Investigation Report A10A0032 (in progress)
- Footnote 5
TSB Investigation Reports A11A0035 and A12A0082 (in progress)
- Date modified: